-40%
NEW PIRANHA P50 IRONWORKER 50 TONS OF CUTTING POWER DON'T MISS
$ 7917.36
- Description
- Size Guide
Description
PRICE ,995.00 PLUS FREIGHTBacked by the Piranha reputation for quality and innovation, our hydraulic ironworker machine lines range from 50 to 140 tons, with both
single-operator machines
and
dual-operator machines
available.
Thanks to a wide range of
ironworker machine tooling
and
ironworker machine attachments
, a Piranha ironworker machine offers unparalleled versatility, as well as savings in machine set-up time.
Our ironworker machines offer standard features unavailable elsewhere in the industry, including:
Urethane stripper attachment*
Automatic urethane hold-downs*
Direct line of sight over the hold-down bar
Low rake angle on flat bar shear
Floating upper blade on angle shear
Low rake angle on coper notcher
Quick change tooling, via Piranha’s unique dovetail design*
MAXIMUM SPECIFICATIONS (rated on mild steel)
Punching (50 Tons)
13/16” diameter through 3/4” plate
Throat Depth
5”
Bending (Optional)
6” up to 12” w/4-way die block
Round Bar Shear
1/4” through 1-3/8”
Square Bar Shear
1/2” through 1”
Flat Bar Shear
12” x 3/8”, 10” x 1/2”, 6″ x 3/4″
Angle Shear
3” x 3” x 3/8”
Coping/Notching
2-1/4” x 3” x 1/4”
Motor
3 HP, 3 Phase
Weight
1,700 Lbs.
STANDARD EQUIPMENT
Mechanical Hold Down
Coupling Wrench
Punch Holder, Urethane Stripper, & Die Block
1/2” Allen Wrench
Set of Angle Knives
Foot Switch
Set of Coper Knives
Set of 13” Plate Shear Knives
Instruction/Parts Book/Video Link
ASK ABOUT OUR BODOR FIBER LASERS
OPTIONAL ATTACHMENTS
BENDING ATTACHMENTS
The bending attachments are designed to increase productivity on the punch end of the machine. The 6” versions are mounted parallel to the beam allowing you unlimited throat depth, while the 12″ version mounts perpendicular to the beam. The 6” bending attachment comes with a single “V” opening. The 12” bending attachment includes a 4-way bending die with openings of 7/8”, 1-1/8”, 1-1/2” and 2”.
OVERSIZE PUNCHING ATTACHMENTS
Oversize Attachments mount in place of standard punch attachment and are designed to punch a 50-ton maximum hole.
QUICKSET GAUGING TABLES
The quickset gauging table option is a productivity tool for the punch end. The gauging table mounts around the die block and uses finger stops to repeat a series of punched holes in flat bar or angle. The attachment comes with a table and flat bar gauge with measuring rules for easy hole location layout. A 5’ or 10’ extension can be added to the left or right side of the base table for longer part processing.
SHEARING BACKGAUGES
The backgauge option is a productivity tool for the shearing section. The backgauge mounts on the drop side of the machine and uses a compression sleeve for infinite, easy adjustment to gauge cut lengths in the angle, flat bar and round bar shearing stations. A support leg is included with the 9’ version.
PIPE NOTCHING ATTACHMENTS
The pipe notching attachments mount easily on the platen table in place of the punch die block. This is a single notch system. To notch both sides of the pipe you must rotate the pipe and realign with the notching die for the second notch.
The pipe notching attachment is made up of three separate pieces, the pipe notching die holder, the pipe notching die and the pipe notching striker.
The pipe notching die holder is a universal die holder that bolts to the platen table and can accept 3/4” through 2” Schedule 40 Pipe Notching Dies
The pipe notching dies are spring return die sets that mount in the pipe notching die holder. Standard sizes of pipe notching dies are 3/4”, 1”, 1-1/4”, 1-1/2” and 2” Schedule 40. Other sizes of pipe and tube notching dies are available upon request but may require a different die holder.
The pipe notching striker is an extended flat bottom punch used in your standard stripper assembly to press down the pipe notching die.